Technical articles from KMP Drivetrain Products on driveshafts, limited slip differentials and final drives for motorsport.
The S65 makes its power at the top of the rev range, and the standard 3.85 keeps the circuit speeds in the wide-ratio half of the gearbox. What the KMP ratios from 3.73 to 5.43 change, and how to pick one.
13% more torque at the wheels in every gear, shorter gears and the same top speed. What a 3.91 final drive changes on the F80 M3 DCT, and what it does not, in figures.
Two reasons to change a final drive: a ratio that matches the car and the circuit, and the strength a motorsport crown wheel and pinion adds over the OEM part.
From open differential to clutch-pack LSD: the components, the three stages of clutch pack loading, friction and stick-slip, and the three variables of a setup.
How a Torsen (geared) differential biases torque, where it stops working, and how it compares with an adjustable plated limited slip differential in motorsport use.
Both are constant velocity joints. How the tripod and the Rzeppa joint work, what each allows in angle and plunge, and why KMP driveshafts for race cars use tripod joints.